ACROBOTIC DS3231 RTC Real-Time Clock Breakout Board (AT24C32 I2C EEPROM)


Regular price $9.99

Want to easily and accurately keep track of seconds, minutes, hours, week, date, month and year information? Then the DS3231 Real-Time Clock RTC (datasheet) is for you! The DS3231 is a low-cost, high-precision I2C RTC with integrated crystal oscillator (TCXO) and crystal. The device includes a battery input that maintains accurate timing when the main power is turned off. The integrated crystal improves the long-term accuracy of the device and reduces the number of components in the production line.

The DS3231 comes in a beefy package because its crystal—needed for tracking time—is located inside the chip! Moreover, a temperature sensor is also in the package to compensate for the temperature-dependent frequency changes by adding/removing clock ticks for increased timekeeping accuracy.

This breakout board makes it easy to connect this RTC to your microcontroller board or single-board computer such as Arduino, ESP8266, BeagleBone or Raspberry Pi! The four pins correspond to power (VCC, GND) and I2C communication (SDA, SCL). We've included in our design pull-up resistors on the I2C lines as customary. With a coin cell (CR2032-sized, not included) plugged into the adapter on the back of the board, you can get years of precision timekeeping, even when main power is lost. This makes it a perfect solution for datalogging, clocks, or any application where time tracking is of the essence.

Features

  • Size: 38mm × 22mm × 14mm
  • Operating voltage: 3.3~5.5V
  • Clock accuracy: 0~40℃ range, accuracy of 2ppm, annual error ~1 minute
  • Includes 2 calendar alarms
  • Programmable square-wave output
  • RTC generates seconds, minutes, hours, days, days, months, and years, and provides leap year compensation to 2100
  • Integrated temperature sensor with ±3℃ accuracy
  • Memory chip: AT24C32 on board (storage capacity of 32K)
  • I2C bus interface. Address: 0x57. Max. transmission speed: 400KHz. Operating voltage: 5V.
  • CR2032 battery adapter (not included)