0.91″ 128×32 OLED Display Module (Blue; I2C)

$10.99

  • Operating Voltage: 3.3~5VDC
  • Connects via I2C to any microcontroller or single-board computer
  • Works with ESP8266, Arduino, 8051, MSP420, STM32, Raspberry Pi!
  • Pixel Color: blue. Resolution: 128×32 pixels; Size: 0.91in (diagonal); built-in SSD1306 driver; I2C address: 0x3C

 

SKU: DIS-00010 Categories: , Tags: ,

Description

These displays are small, only about 1in diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128×32 individual blue OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

This breakout can be used with an I2C interface – selectable by soldering two jumpers on the back. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It’s easier than ever to connect directly to your 3.3V or 5V microcontroller or single board computer!

Features:

  • Size: 0.96in
  • Resolution: 128×32pixels
  • Viewing angle: greater than 160deg
  • Power: 0.04W (low-power mode)
  • Input voltage: 3.3V~5VDC
  • Working temperature: –30~80°C
  • Size: 27mm×13mm×4.1mm
  • Driver IC: SSD1306
  • Communication: I2C
  • Backlight: OLED self-lit (no backlight)
  • Pixel Color: blue

Additional information

Product Dimensions

1.06 x 0.51 x 0.16 inches

Item Weight

0.634 ounces

ASIN

B07NP7YQZL

Item model number

DIS-00010

Date First Available

January 6, 2017

Manufacturer

ACROBOTIC Industries, Visit the ACROBOTIC Store

Reviews

There are no reviews yet.

Be the first to review “0.91″ 128×32 OLED Display Module (Blue; I2C)”

Your email address will not be published. Required fields are marked *