This is a standard, full-size, black, solderless breadboard that carries 2 power buses and 2 sets of 5-column 60-row sections for a total of 830 tie-in points. The spacing between the sockets is the standard 0.1in. The gap between the two sets of columns is the standard 0.3in. The gap allows for straddling Dual Inline Package chips like the ATmega328p, or our 6mm×6mm push buttons. For using the board, we recommend using solid-core wires with a gauge in the range 29–20AWG.
The self-adhesive on the back allows us to mount the board to a panel or inside an enclosure, please note that once the board is affixed it may be a bit hard to remove so plan ahead 🙂 These boards are quite modular, so on all four sides you’ll find interlocking parts that allow you to connect several of them to one another. Their size is 2.2in wide by 6.78in long, with a height of 0.33in (54.29mm×172.1mm×8.5mm). You can pull the power rails off to make the breadboard as thin as 1.4in (3.5cm).
- 830 tie-in point, full-size, solderless breadboard (Black)
- 2.2in wide by 6.78in long
- Perfect for prototyping your circuits and connecting to Arduino, Raspberry Pi, ESP8266, and ESP32
- Double-sided tape on the back allows for affixing it to most surfaces